Water-based polyurethane composite anticorrosive barrier coating | European Coatings

2022-09-10 01:28:20 By : Mr. Reyphon Frank

Scientists report on a polyurethane composite anticorrosive barrier coating, that has been enabled via enhanced dispersion of functionalised graphene oxide in the presence of acidified multi-walled carbon nanotubes.

Organic films and coatings offer many advantages as corrosion barriers. Image source: dbphotos – stock.adobe.com (symbol image).

Organic films and coatings, specifically those incorporating graphene oxide, offer many advantages as corrosion barriers due to the excellent shielding and tailorable characteristics of graphene oxide.

A simple method was now used to prepare a composite coating with polyurethane (PU) as a polymer matrix; gallic acid modified graphene oxide (FGO) flakes and acidified multi-walled carbon nanotubes (FMWCNTs) acted as nanoscale reinforcement. The presence of FMWCNTs improved the dispersion of FGO in PU, and the composite coating exhibited nearly no defects. The one-dimensional FMWCNTs and two-dimensional graphene oxide sheets attract each other to form a relatively stable layered structure, such that the graphene oxide sheets form a large shielding layer.

The anticorrosion properties of the pristine PU and composite coatings were investigated by electrochemical impedance spectroscopy tests for 96 h. The composite coating reinforced by two carbon nanomaterials simultaneously underwent no corrosion after immersion for 96 h, and the corrosion resistance was better than that of the other coatings. The enhanced anticorrosion properties of the FMWCNT-FGO/PU composite coating are attributed to the fully exploited reinforcement effect from the network of FGO and FMWCNTs that is enabled via enhanced dispersion.

The study has been published in Progress in Organic Coatings, Volume 146, September 2020.

The industry’s most comprehensive handbook - now available in its 3rd edition: the BASF Handbook covers the entire spectrum from coatings formulation and relevant production processes through to practical application aspects. It takes a journey through the industry’s various sectors, placing special emphasis on automotive coating and industrial coating in general. The new edition has been completely updated, featuring several new sections on nanoproducts, low-emissions, biobased materials, wind turbine coating, and smart coatings.

You are currently not logged in

To leave a comment, please log in.

There was an error while sending your comment. Please try again.

Your comment was too long. There are a maximum of 2048 symbols allowed!